The leading scientist in the field of welding steel bases.(100 Anniversary A.M. Makara)
Abstract
The article explores the history of the development of the technology of welding armor steels. In 1942established the world's first technology for automatic welding tanks. Since that time, under the direction of A.M. Makara create new armor steel, their production technology and welding.
Downloads
References
Джерела та література
Корниенко А.Н. Проблемы и методы исследования вклада в развитие техники / А.Н. Корниенко // Сборник трудов Всесоюз. научно-технической конференции «100-летие изобретения сварки по методу Н.Г.Славянова» 15-17 сент. 1988 г. .– Пермь : Перм. политехн. инс-т. 1989. – С.14–19.
Товажнянський Л.Л. Танкоград: Історія. Люди. Події. / Л.Л. Товажнянський, О.Є. Александров, Л.М. Бєсов та ін. / Харків : НТУ «ХПІ», 2004. – 236с.
Саєнко М.В. Традиції, втілені в броню. / М.В. Саєнко // Творці легендарної «тридцять четвірки». - К. : НТУУ «КПІ», 2002. – С81–89.
Патон Е.О. Воспоминания /Лит. Запись Ю. Буряковского. – Киев : Гослитиздат Украины, 1955. – 324с.
Корнієнко О.М. Деякі сторінки життя Є.О.Патона /О.М. Корнієнко // Видатні конструктори України. –Т.1. – К.: «Екмо», 2009. – С. 76–80.
Патон Б.Е. Шов длиной в 4000000 метров / Б.Е. Патон // Т-34: путь к победе. Воспоминания танкостроителей и танкистов. – К.: Изд-во полит. литерат. Украины, 1989. – 255с.
Патон Е.О. Скоростная автоматическая сварка под слоем флюса. /Е.О. Патон /3-е изд.–Москва; Ленинград: Машгиз, 1942. – 110 с.
Патон Б.Е. Экспериментальное исследование процесса автоматической сварки под слоем флюса / Б.Е. Патон, А.М. Макара. – Киев : ИЭС, 1944. – 92с.
Патон Б.Е. Развитие автоматической электросварки под флюсом за годы войны / Б.Е. Патон // Электричество. – 1945. – № 3. – С. 3–5.)
Патон Е.О. Руководство по автоматической сварке бронеконструкций / Е.О. Патон. – К.: Институт электросварки АН УССР, 1943. – 139 с.
Патон Б.Е .Работа сварочных головок в условиях изменений сетевого напряжения / Б.Е. Патон, А.М Макара // Автогенное дело. – 1946. – № 3–4. – С. 1–6.
Медовар Б.И. О периодичности процесса первичной кристаллизации сварочной ванны при сварке под флюсом / Б.И. Медовар, А.М. Макара //Автогенное дело. – 1947. – №10. – С. 1–5.
Макара А.М. О характере первичной кристаллизации сварочной ванны А.М. Макара, Б.И. Медовар //Автог. дело. – 1948. – №10. – С. 25–27.
Макара М.А. Процесс плавления основного металла при автосварке под флюсом / А.М Макара // Труды по автомат. сварке под флюсом. – 1948. - № 1. – С. 47–93.
Автосварка под флюсом малоуглеродистой стали большой толщины / Под ред. Е.О. Патона и др. – Киев; Москва : Машгиз, 1948. – 344 с.
Патон Б.Е. Электрошлаковая сварка в СССР./ Б.Е. Патон, Д.А.Дудко, Г.З. Волошкевич и др // Сварка и специальная электрометаллургия : Сб. научных трудов. – Киев: Наук. думка, 1984. – С. 106–114.
Патон Б.Е.Современное состояние и перспективы дальнейшего развития электрошлакового переплава на Украине / Б.Е Патон, Б.И. Медовар, Ю.В. Латаш // Металлург. и горноруд. Пром–сть. — 1962. – № 5. – С. 12–19.
Патон Б.Е.. Работы Института электросварки им. Е.О.Патона НАН Украины в области танкостроения / Б.Е. Патон, В.Г. Гордонный // Автоматическая сварка . – 2002. – №2. – С 33–39.
Патон Б.Е. Современное состояние и перспективы развития электрошлакового переплава в Советском Союзе / Б.И. Медовар, Ю.В. Латаш // Специальная электрометал¬лургия. – 1968. – Вып. 1. – С. 5–15.
Б.Е. Патон. Особенности строения и процессов кристаллизации крупных электрошлаковых слитков / Б.Е. Патон, Б.И. Медовар, Ю.Г. Емельяненко, Ю.В. Латаш // Специальная электрометаллургия – 1970. – Вып. 4. – С. 3–8.
Мусияченко В.Ф. Основы металлургии и технологии сварки высокопрочных низколегированных сталей /В.Ф. Мусияченко. –К. : Наук. думка, 1976. – 52 с.
References
Kornienko, A.N. (1989). Problemy i metody issledovaniya vklada v razvitie tekhniki . Sbornik trudov Vsesoyuz, 14-19.
Tovazhnianskyi , L.L. (2004). Tankohrad: Istoriia. Liudy. Podii. . Kharkiv: NTU «KhPI».
Saienko , M.V. (2002). Tradytsii, vtileni v broniu. Tvortsi lehendarnoi «trydtsiat chetvirky», 81-89.
Paton, E.O. (1955). Vospominaniya. Kiev: Goslitizdat Ukrainy.
Korniienko, O.M. (2009). Deiaki storinky zhyttia Ye.O.Patona . Vydatni konstruktory Ukrainy, 76-80.
Paton , B.E. (1989). Shov dlinoj v 4000000 metrov . Kiev: Izd-vo polit. literat. Ukrainy.
Paton , E.O. (1942). Skorostnaya avtomaticheskaya svarka pod sloem flyusa. Moskva: Mashgiz.
Paton, B.E. (1944). Ehksperimental'noe issledovanie processa avtomaticheskoj svarki pod sloem flyusa. Kiev: IEHS.
Paton , B.E. (1945). Razvitie avtomaticheskoj ehlektrosvarki pod flyusom za gody vojny. Ehlektrichestvo, 3, 3-5.
Paton, E.O. (1943). Rukovodstvo po avtomaticheskoj svarke bronekonstrukcij. Kiev: Institut ehlektrosvarki AN USSR.
Paton , B.E. (1946). Rabota svarochnyh golovok v usloviyah izmenenij setevogo napryazheniya . Avtogennoe delo, 3, 1-6.
Medovar , B.I. (1947). O periodichnosti processa pervichnoj kristallizacii svarochnoj vanny pri svarke pod flyusom. Avtogennoe delo., 10, 1-1.
Makara , A.M. (1948). O haraktere pervichnoj kristallizacii svarochnoj vanny. Avtog. delo., 10, 25-27.
Makara , M.A. (1948). Process plavleniya osnovnogo metalla pri avtosvarke pod flyusom. Trudy po avtomat. svarke pod flyusom, 1, 47-93.
Patona, E.O. (1948). Avtosvarka pod flyusom malouglerodistoj stali bol'shoj tolshchiny . Kiev: Mashgiz.
Paton, B.E. (1984). Ehlektroshlakovaya svarka v SSSR. Svarka i special'naya ehlektrometallurgiya : Sb. nauchnyh trudov,106-114.
Paton, B.E. (1962). Sovremennoe sostoyanie i perspektivy dal'nejshego razvitiya ehlektroshlakovogo pereplava na Ukraine. Metallurg. i gornorud. Promst', 5, 12-19.
Paton, B.E. (2002). Raboty Instituta ehlektrosvarki im. E.O.Patona NAN Ukrainy v oblasti tankostroeniya. Avtomaticheskaya svarka, 2, 33-39.
Paton , B.E. (1968). Sovremennoe sostoyanie i perspektivy razvitiya ehlektroshlakovogo pereplava v Sovetskom Soyuze. Special'naya ehlektrometallurgiya, 5-15.
Paton, B.E. (1970). Osobennosti stroeniya i processov kristallizacii krupnyh ehlektroshlakovyh slitkov. Special'naya ehlektrometallurgiya , 3-8.
Musiyachenko, V.F. (1976). Osnovy metallurgii i tekhnologii svarki vysokoprochnyh nizkolegirovannyh stalej . Kyiv: Nauk. dumka.
Abstract views: 4343 PDF Downloads: 80
License terms: authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License International CC-BY that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
The scanned copy of the "Agreement” on the authors" copyright transfer on the manuscript publication and the subsequent posting of the paper on the Internet (in * .pdf or * .jpg format) is to be attached to the manuscript of the paper.
By this agreement the author certifies that the submitted material:
- does not infringe the copyright of other persons or organizations;
- was not previously published in other publishing houses and has not been submitted for publication in other editions.
The author passes the editorial board of the journal "History of science and technology" rights to:
- publication of the article in Ukrainian (English and Russian) language and distribution of its printed copy;
- translation of the article into English language (for articles in Ukrainian and Russian language) and distribution of its translated printed copy;
- distribution of the article electronic copy, as well as electronic copy of the article English translation (for articles in Ukrainian and Russian), via any electronic means (placing on the official web-site of the journal, electronic databases, repositories, etc.) printed copy of the translation.
The author reserves the right without the consent of the editorial board and founders:
- Use the materials of the article in whole or in part for educational purposes.
- Use the materials of the article in whole or in part to write their own dissertations.
- Use the materials of the article for the preparation of abstracts, conference reports, as well as oral presentations.
- Place electronic copies of the article (including the final electronic copy downloaded from the official web-site of the journal) to:
- personal web-resources of all authors (web-sites, web-pages, blogs, etc.);
- web-resources of institutions where authors work (including electronic institutional repositories);
- non-commercial web-resources of open access (for example, arXiv.org).
In all cases, the availability of a bibliographic link to an article or hyperlink to its electronic copy on the official website of the journal is compulsory.